Water pump, tightening torque

Verfasst von Johnny am 23. November 2022 - 23:01
in

Hello,
What is the tightening torque for the water pump screw M6.
Appreciate a reply. Thanks.

Bild von Pieter Jakobs
Verfasst von Pieter Jakobs am 25. November 2022 - 10:51.

Hello Johnny, I checked the service manual but there is no indication of the tightening torque in there, so tighten them with feeling.

 

Best regards, Pieter

Bild von Pieter Jakobs
Verfasst von Pieter Jakobs am 25. November 2022 - 12:12.

Hello Johnny,

 

please note the following instruction from the workshop manual, this is important to obtain a good o-ring seal:

 

Best regards, Pieter

Bild von Andreas Bertsch
Verfasst von Andreas Bertsch am 26. November 2022 - 9:32.

The tightening for M6 screws are 10-12 Nm

BR Andreas

Verfasst von Johnny am 26. November 2022 - 22:20.

Thanks, then the screw is of quality 10.9 I guess.

Bild von Andreas Bertsch
Verfasst von Andreas Bertsch am 30. November 2022 - 16:02.

No, it's a normal 8.8
Cheers Andreas

Verfasst von Johnny am 26. November 2022 - 22:27.

Pieter Jakobs schrieb:

Hello Johnny,

 

please note the following instruction from the workshop manual, this is important to obtain a good o-ring seal:

 

Best regards, Pieter

Thank you very much for the reply and Tipps und Tricks.

Verfasst von Johnny am 26. November 2022 - 22:22.

Pieter Jakobs schrieb:

Hello Johnny, I checked the service manual but there is no indication of the tightening torque in there, so tighten them with feeling.

 

Best regards, Pieter


Thanks for the reply.